and<\/p>\n
https:\/\/jnyyz.wordpress.com\/2012\/03\/27\/extra-feet-for-the-xtracycle\/<\/a><\/p>\n So, I followed their advice, in particular the advice in the second link – going with vinyl caps instead of rubber ones. Based on this information,\u00a0I purchased a couple types\u00a0of caps\/feet at Menards:<\/p>\n https:\/\/www.menards.com\/main\/home-decor\/furniture\/casters-furniture-hardware\/grips-pads-tips\/shepherd-7-8-black-hi-vinyl-leg-tips\/p-2718333.htm<\/a><\/p>\n and<\/p>\n http:\/\/www.menards.com\/main\/furnitureutilityhardware\/78inch-vinyl-hi-tips-black\/p-1469292.htm?plckReviews=true<\/a><\/p>\n I\u00a0placed the caps, from the first link, on the KickBack – they fit like a champ and so far seem to be working just fine.<\/p>\n Multiple sets of replacement feet for 1\/10 the OEM cost is a bargain. Thanks, Andy and Prof. from Toronto. Now I need to figure out a cheap and better way to replace the KickBack’s spring.<\/p>\n **********************************************<\/p>\n 5\/6\/2017 UPDATE:<\/p>\n Was doing some post-winter maintenance on my Big Dummy and noticed the 7\/8-inch chair tips were both punctured and I believe I had just put fresh ones on a year ago.\u00a0All’s good.\u00a0I removed the punctured ones with a utility knife\u00a0and tossed a couple new ones on. Menards still carries them, so it looks like I can pick up another 4-pack of the 7\/8-inch size.<\/p>\n","protected":false},"excerpt":{"rendered":" I’ve gone through several plastic feet on the KickBack, mounted to my Big Dummy. I’ve grown tired of purchasing replacement kits to source the plastic feet, as the kits are relatively expensive and I don’t need all the extra parts … Continue reading ![\"IMG_1620\"](\"https:\/\/www.schwie.com\/brad\/wp-content\/uploads\/2015\/05\/IMG_1620-150x150.jpg\")
<\/a><\/p>\n