Here’s what I did to get my Yahoo Mail importing into Mail.app with the latest Yahoo.lua 0.1.9d for FreePOPS (or MacFreePOPS).

I opened yahoo.lua and changed line 252 from:

strRegExpWebSrvUrl = “webserviceURL: ‘([^’]+)'”,

to:

strRegExpWebSrvUrl = “webservice: ‘([^’]+)'”,

Then I downloaded Firefox 1.5.0.7, switched on the Yahoo Mail Beta, and then turned it back off.

Next, I quit my mail client and quit FreePops (in my case, MacFreePOPS).

Finally, I launched MacFreePops and then fired up my mail client, Mail.app again. Everything started downloading like the old days!!!

So, I was fooling around and installed OpenSSH 4.3p2 using darwinports on my PowerBook. Something got hosed up, because I suddenly couldn’t connect to my own machine any more when I entered the following:

Brad-and-Tinas-iMac:~ bschwie$ ssh -vvv localhost

I got this:

OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [::1] port 22.
debug1: Connection established.
debug1: identity file /Users/bschwie/.ssh/identity type -1
debug3: Not a RSA1 key file /Users/bschwie/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type ‘—–BEGIN’
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type ‘Proc-Type:’
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type ‘DEK-Info:’
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type ‘—–END’
debug3: key_read: missing keytype
debug1: identity file /Users/bschwie/.ssh/id_rsa type 1
debug3: Not a RSA1 key file /Users/bschwie/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type ‘—–BEGIN’
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type ‘Proc-Type:’
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type ‘DEK-Info:’
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type ‘—–END’
debug3: key_read: missing keytype
debug1: identity file /Users/bschwie/.ssh/id_dsa type 2
ssh_exchange_identification: Connection closed by remote host

To fix this issue, I had to do the following:

Brad-and-Tinas-iMac:~/.ssh bschwie$ sudo mkdir /var/empty
Brad-and-Tinas-iMac:~/.ssh bschwie$ sudo chown root:sys /var/empty

Maybe this file got blown out by darwinports? I don’t know…

For people looking to upgrade their Verizon issued Motorola RAZR v3c to the latest .04 firmware, download it here. If you want the ability to transfer files with OBEX, be sure to downgrade your phone to the .02 firmware first and then upgrade to .04.

For anyone who needs an extra 5% off at RockAuto.com use this discount code: 420764390545. Its valid until July 4, 2006.

My lovely bride gets all the credit for this hint… My painfully swollen knee badly needed elevation after my ACL reconstruction revision that was performed two days ago by the wildly famous Dr. Dreamy (aka Dr. Chris Meyer) (and no, I didn’t pick out his nickname). I think Tina noticed that I was struggling to keep a pillow beneath my knee as I laid in bed, but it just wasn’t working as my knee/leg continuously rolled off. She warmly made a recommendation to shove the Snoogle underneath my knee for a little cuddly elevation. Sure enough, she was right! The Snoogle keeps my knee in place without causing any pain.

For anyone that is going to go through an ACL surgery, get a Snoogle! You’ll be glad you did.

I installed the former Wavelan Silver PC Card guts in my friend’s mom’s iMac G3 last Thursday evening. The card isn’t fully seated, but it appears to be functioning correctly! For people concerned about getting the card fully seated, it would be best to clip off one of the plastic AirPort card holder’s that is attached to the board (its whitish-transparent plastic that is only useful if you want to give the true AirPort card more support). Still, without clipping this plastic support, the card seats 90% of the way.

AirPort Card for $30. Done.

If I ever stop back over there, I’ll snap some pictures and post back.

A friend of mine wanted to install an AirPort Card in his mother’s old iMac G3 so she could get wireless internet access. We checked on eBay and the going rate for an AirPort card was well over $130. Online stores weren’t any better with one place listing a card at $180! Great Zeus! This made me pretty mad knowing that an elderly lady couldn’t get wifi on her Mac for less than a hundred dollars. So, when I got home, I vented my anger by tearing apart a Lucent Wavelan Silver PC Card. After the guts of it were exposed, I tossed it into my iMac G4, rebooted, and BAM! The iMac acknowledged it as a native Apple AirPort Card. I haven’t installed it in her iMac G3 yet, but I’m very confident it will work. The great thing about this is, these cards can be had for less than $25 with shipping via eBay, so this solution even trumps the silly Sony Vaio PCWA-150S as the cheapest AirPort alternative I can find.

Unfortunately, yes… Dr. Dreamy called today and confirmed my MRI results. Torn ACL on my left knee and a partially torn meniscus. Doh!!! I scheduled surgery for February 22 and I’m going with cadaver parts this time. I plan to begin the countdown to soccer in earnest on February 23.

For people using an old HP/Compaq Omnibook 4150B that are having difficulty getting their DVD module (f1653b) to work with Windows XP, install Mediamatics DVD Express using your OEM CD from HP (drop me a note if you need a copy) and then run the free upgrade to version 5 that IBM is still circulating: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4GV37K. Works like a champ for me.

So, I’ve been deploying wifi on older Macs for my extended family. Here’s what I’ve found… A TrendNET TEW-403PIplus (or TEW-403PI+) works fantastic in a stock beige G3 PowerMac with a revision A motherboard (OK, we suped the G3 from 266 up to 300). I’m also looking to add USB 2.0 and firewire to this machine, so I bought a revision B ROM for it, and that works with the TrendNET card as well.

For my mother-in-law and administrative assistant at work, I popped a hardware version B1 DWL-G122 USB wireless adapter (with Ratoc driver) into their G3 iMacs, and their both chugging away happily now.